EC1201 DIGITAL ELECTRONICS

ANNA UNIVERSITY CHENNAI :: CHENNAI 600 025
CURRICULUM 2004
B.E. ELECTRONICS AND COMMUNICATION ENGINEERING
EC1201 DIGITAL ELECTRONICS 3 1 0 100

AIM
To learn the basic methods for the design of digital circuits and provide the fundamental concepts used in the design of digital systems.

Objectives

• To introduce number systems and codes
• To introduce basic postulates of Boolean algebra and shows the correlation between Boolean expressions
• To introduce the methods for simplifying Boolean expressions
• To outline the formal procedures for the analysis and design of combinational circuits and sequential circuits
• To introduce the concept of memories and programmable logic devices.

UNIT I NUMBER SYSTEMS 9

Binary, Octal, Decimal, Hexadecimal-Number base conversions – complements – signed Binary numbers. Binary Arithmetic- Binary codes: Weighted –BCD-2421-Gray code-Excess 3 code-ASCII –Error detecting code – conversion from one code to another-Boolean postulates and laws –De-Morgan’s Theorem- Principle of Duality- Boolean expression – Boolean function- Minimization of Boolean expressions – Sum of Products (SOP) –Product of Sums (POS)-Minterm- Maxterm- Canonical forms – Conversion between canonical forms –Karnaugh map Minimization – Don’t care conditions.

UNIT II 9
LOGIC GATES: AND, OR, NOT, NAND, NOR, Exclusive – OR and Exclusive – NOR- Implementations of Logic Functions using gates, NAND –NOR implementations –Multi level gate implementations- Multi output gate implementations. TTL and CMOS Logic and their characteristics –Tristate gates.

COMBINATIONAL CIRCUITS:
Design procedure – Adders-Subtractors – Serial adder/ Subtractor - Parallel adder/ Subtractor- Carry look ahead adder- BCD adder- Magnitude Comparator- Multiplexer/ Demultiplexer- encoder / decoder – parity checker – code converters. Implementation of combinational logic using MUX, ROM, PAL and PLA.

UNIT III SEQUENTIAL CIRCUIT 9
Flip flops SR, JK, T, D and Master slave – Characteristic table and equation –Application table – Edge triggering –Level Triggering –Realization of one flip flop using other flip flops –Asynchronous / Ripple counters – Synchronous counters –Modulo – n counter –Classification of sequential circuits – Moore and Mealy -Design of Synchronous counters: state diagram- State table –State minimization –State assignment- ASM-Excitation table and maps-Circuit implementation - Register – shift registers- Universal shift register – Shift counters – Ring counters.

UNIT IV ASYNCHRONOUS SEQUENTIAL CIRCUITS 9

Design of fundamental mode and pulse mode circuits – primitive state / flow table – Minimization of primitive state table –state assignment – Excitation table – Excitation map- cycles – Races –Hazards: Static –Dynamic –Essential –Hazards elimination.

UNIT V MEMORY DEVICES 9

Classification of memories –RAM organization – Write operation –Read operation – Memory cycle - Timing wave forms – Memory decoding – memory expansion – Static RAM Cell-Bipolar RAM cell – MOSFET RAM cell –Dynamic RAM cell –ROM organization - PROM –EPROM –EEPROM –EAPROM –Programmable Logic Devices –Programmable Logic Array (PLA)- Programmable Array Logic (PAL)-Field Programmable Gate Arrays (FPGA).

TUTORIAL 15

TOTAL : 60

• M. Morris Mano, Digital Design, 3.ed., Prentice Hall of India Pvt. Ltd., New Delhi, 2003/Pearson Education (Singapore) Pvt. Ltd., New Delhi, 2003 – (Unit I, II, V)
• John .M Yarbrough, Digital Logic Applications and Design, Thomson- Vikas publishing house, New Delhi, 2002. (Unit III, IV)

REFERENCES

• S. Salivahanan and S. Arivazhagan, Digital Circuits and Design, 2nd ed., Vikas Publishing House Pvt. Ltd, New Delhi, 2004
• Charles H.Roth. “Fundamentals of Logic Design”, Thomson Publication Company, 2003.
• Donald P.Leach and Albert Paul Malvino, Digital Principles and Applications, 5 ed., Tata McGraw Hill Publishing Company Limited, New Delhi, 2003.
• R.P.Jain, Modern Digital Electronics, 3 ed., Tata McGraw–Hill publishing company limited, New Delhi, 2003.
• Thomas L. Floyd, Digital Fundamentals, Pearson Education, Inc, New Delhi, 2003
• Donald D.Givone, Digital Principles and Design, Tata Mc-Graw-Hill Publishing company limited, New Delhi, 2003.

FEEL USEFUL PLEASE GIVE +1