May 18, 2010

ANNA UNIVERSITY CHENNAI B.E DEGREE PROGRAMME CIVIL ENGINEERING SEMESTER V /05 SYLLABUS


SEMESTER V
(Applicable to the students admitted from the Academic year 2006 – 2007 onwards)
Code No. Course Title L T P M
THEORY
CE1301 Irrigation Engineering 4 0 0 100
CE1302 Structural Analysis – Classical methods 3 1 0 100
CE1303 Railways, Docks & Harbours and Airports 4 0 0 100
CE1304 Environmental Engineering 3 0 0 100
CE1305 Foundation Engineering 3 0 0 100
E1*** Elective – I 3 0 0 100
PRACTICAL
CE1306 Environmental Engineering Laboratory 0 0 3 100
CE1307 Soil Engineering Laboratory 0 0 3 100
GE1352 Communication Skills  Laboratory * 0 0 4 100
* All branches of B.E. & B.Tech. programme offered in V semester except B.E.(CSE),
   B.E. (ECE)   & B.E. (Mech.)
CE1301 IRRIGATION ENGINEERING                                                     4  0  0  100                         
OBJECTIVE
At the end of the semester, the student shall understand the need and mode of irrigation. The student also shall know the irrigation management practices of the past, present and future. The structures involved, the elementary hydraulic design of different structures and the concepts of maintenance shall also form part. Finally, the student shall be in a position to conceive and plan any type of irrigation project.

1.         INTRODUCTION                                                                                                        12
Irrigation – Need and mode of irrigation – Merits and demerits of irrigation – Crop and crop seasons – consumptive use of water – Duty – Factors affecting duty – Irrigation efficiencies – Planning and Development of irrigation projects.
2.         IRRIGATION METHODS                                                                                            10
Canal irrigation – Lift irrigation – Tank irrigation – Flooding methods – Merits and demerits – Sprinkler irrigation – Drip irrigation.
3.         DIVERSION AND IMPOUNDING STRUCTURES                                             14
Weirs – elementary profile of a weir – weirs on pervious foundations - Types of impounding structures  - Tanks, Sluices and Weirs – Gravity dams – Earth dams – Arch dams – Spillways – Factors affecting location and type of dams – Forces on a dam – Hydraulic design of dams.
4.         CANAL IRRIGATION                                                                                                 14
Alignment of canals – Classification of canals – Canal drops – Hydraulic design of drops – Cross drainage works – Hydraulic design of cross drainage works – Canal Head works – Canal regulators – River Training works.
5.         IRRIGATION WATER MANAGEMENT                                                    10
Need for optimisation of water use – Minimising irrigation water losses – On farm development works – Percolation ponds – Participatory irrigation management – Water users associations – Changing paradigms in water management – Performance evaluation.
                                                                                                            TOTAL : 60
 TEXT BOOKS
1.         Asawa, G.L., “Irrigation Engineering”, New Age International Publishers
2.         Sharma R.K., and Sharma T.K., “Irrigation Engineering”, S. Chand and company, New Delhi
3.         Gupta, B.L, & Amir Gupta, “Irrigation Engineering”, Satya Praheshan, New Delhi

REFERENCES

1.         Dilip Kumar Majumdar, “Irrigation Water Management (Principles & Practices)”, Prentice  
             Hall of India (P), Ltd.
2.         Basak, N.N, “Irrigation Engineering”, Tata McGraw-Hill Publishing Co.
3.         Garg, S.K., “Irrigation Engineering”
CE1302             STRUCTURAL ANALYSIS – CLASSICAL METHODS                 3  1  0  100
OBJECTIVE                                                                                         
The members of a structure are subjected to internal forces like axial forces, shearing forces, bending and torsional moments while transferring the loads acting on it. Structural analysis deals with analysing these internal forces in the members of the structures. At the end of this course students will be conversant with classical method of analysis.
1.         DEFLECTION OF DETERMINATE STRUCTURES                                                       9
Principles of virtual work for deflections – Deflections of pin-jointed plane frames and rigid plane frames – Willot diagram - Mohr’s correction
2.         MOVING LOADS AND INFLUENCE LINES                                                                 9
(DETERMINATE & INDETERMINATE STRUCTURES)
Influence lines for reactions in statically determinate structures – influence lines for members forces in pin-jointed frames – Influence lines for shear force and bending moment in beam sections – Calculation of critical stress resultants due to concentrated and distributed moving loads.
Muller Breslau’s principle – Influence lines for continuous beams and single storey rigid frames – Indirect model analysis for influence lines of indeterminate structures – Beggs deformeter
3.         ARCHES                                                                                                                   9
Arches as structural forms – Examples of arch structures – Types of arches – Analysis of three hinged, two hinged and fixed arches, parabolic and circular arches – Settlement and temperature effects.
4.         SLOPE DEFLECTION METHOD                                                                               9
Continuous beams and rigid frames (with and without sway) – Symmetry and antisymmetry – Simplification for hinged end – Support displacements.
5.         MOMENT DISTRIBUTION METHOD                                                                          9
Distribution and carry over of moments – Stiffness and carry over factors – Analysis of continuous beams – Plane rigid frames with and without sway – Naylor’s simplification.
TUTORIAL    15   
            TOTAL : 60
TEXT BOOKS
1.         “Comprehensive Structural Analysis – Vol. 1 & Vol. 2”, Vaidyanadhan, R and Perumal, P, Laxmi Publications, New Delhi, 2003
2.         “Structural Analysis”, L.S. Negi & R.S. Jangid, Tata McGraw-Hill Publications, New Delhi, Sixth Edition, 2003
3.         “Intermediate Structures”, Wang, C.K., McGraw-Hill
REFERENCES
  1. Analysis of Indeterminate Structures – C.K. Wang, Tata McGraw-Hill
CE1303 RAILWAYS, AIRPORTS AND DOCKS & HARBOURS    4  0  0  100
OBJECTIVE
This course imparts the students knowledge of planning, design, construction and maintenance of railway tracks. The students acquire proficiency in the application of modern techniques such as GIS, GPS and remote sensing in Railway Engineering. The student develops skills on airport planning and design with the prime focus on runway and taxiway geometrics. Students become conversant with the definition, purpose, location and materials of coastal structures such as piers, breakwaters, wharves, jetties, quays and spring fenders. The students acquire knowledge on site investigation for location and planning of harbours.
  1. RAILWAY PLANNING AND DESIGN                                                                          12
Role of Indian Railways in National Development -
Engineering Surveys for Track Alignment – Obligatory points - Conventional and Modern methods (Remote Sensing, GIS & GPS, EDM and other equipments)
Permanent Way, its Components and Functions of each Component:
Rails - Types of Rails, Rail Fastenings, Concept of Gauges, Coning of Wheels, Creeps and kinks
Sleepers – Functions, Materials, Density
Ballasts – Functions, Materials, Ballastless Tracks
Geometric Design of Railway Tracks – Gradients and Grade Compensation, Super-Elevation, Widening of Gauges in Curves, Transition Curves, Horizontal and Vertical Curves (Derivations of Formulae and Problems)
2.         RAILWAY TRACK CONSTRUCTION, MAINTENANCE AND OPERATION         12
Points and Crossings - Design of Turnouts, Working Principle
Signalling, Interlocking and Track Circuiting
Construction & Maintenance – Conventional, Modern methods and Materials, Track Drainage
Track Modernisation– Automated maintenance and upgrading, Technologies, Re-laying of Track,
Lay outs of Railway Stations and Yards, Rolling Stock, Tractive Power, Track Resistance, Level Crossings
3.         AIRPORT PLANNING AND DESIGN                                                                           12
Advantages and Limitations of Air Transport, Components of Airports
Airport Planning – Air traffic potential, Site Selection, Design of Components, Cost Estimates, Evaluation and Institutional arrangements
Runway Design- Orientation, Cross wind Component, Wind rose Diagram (Problems), Geometric Design and Corrections for Gradients (Problems), Drainage
Taxiway Design – Geometric Design Elements, Minimum Separation Distances, Design Speed,
Airport Drainage
Airport Zoning  - Clear Zone, Approach Zone, Buffer Zone, Turning Zone, Clearance over Highways and Railways

 

4.         AIRPORT LAYOUTS, VISUAL AIDS, AND AIR TRAFFIC CONTROL               12

Airport Layouts – Apron, Terminal Building, Hangars, Motor Vehicle Parking Area and
Circulation Pattern, Case studies of Airport Layouts
Airport Buildings – Primary functions, Planning Concept, Principles of Passenger Flow, Passenger Facilities
Visual Aids – Runway and Taxiway Markings, Wind Direction Indicators, Runway and Taxiway Lightings
Air Traffic Control – Basic Actions, Air Traffic Control Network
Helipads, Hangars, Service Equipments.
  1. HARBOUR ENGINEERING & OTHER MODES OF TRANSPORT                     12
Definition of Terms - Harbours, Ports, Docks, Tides and Waves, Littoral Drift, Sounding, Area, Depth, Satellite Ports
Requirements and Classification of Harbours
Site Selection & Selection Investigation – Speed of water, Dredging, Range of Tides, Waves and Tidal Currents, Littoral Transport with Erosion and Deposition, Soundings, Anchoring Grounds, Geological Characteristics, Winds & Storms, Position and Size of Shoals
Shore Considerations- Proximity to Towns/Cities, Utilities, Construction Materials, Coast Lines
 Dry and Wet Docks,, Planning and Layouts
Entrance, Position of Light Houses, Navigating
Terminal Facilities – Port Buildings, Warehouse, Transit Sheds, Inter-modal Transfer Facilities, Mooring Accessories, Navigational Aids
Coastal Structures- Piers, Breakwaters, Wharves, Jetties, Quays, Spring Fenders
Coastal Shipping, Inland Water Transport and Container Transportation.
Pipe Ways, Rope Ways,
                                                                                               
            TOTAL : 60
TEXT BOOKS
  1. Saxena Subhash C and Satyapal Arora, A Course in Railway Engineering, Dhanpat Rai and Sons, Delhi, 1998.
  2. Khanna S K, Arora M G and Jain S S, Airport Planning and Design, Nemchand and Brothers, Roorkee, 1994.
  3. S P Bindra, A Course in Docks and Harbour Engineering, Dhanpat Rai and Sons, New Delhi, 1993.
REFERENCES
  1. Rangwala, Railway Engineering, Charotar Publishing House, 1995.
  2. Rangwala, Airport Engineering, Charotar Publishing House, 1996.
  3. Oza and Oza, “A course in Docks & Harbour Engineering”.
  4. J.S. Mundrey, “A course in Railway Track Engineering”.

CE1304 ENVIRONMENTAL ENGINEERING                                            3  0  0  100
           
OBJECTIVE                   
                                                                                       
This subject deals with treatment of water and wastewater including estimation of water and sanitary sewage (excluding industrial waste water). On completion of the course, the student is expected to know about the design principles involved in treatment of municipal water and wastewater. (The detailed design of treatment units are covered under the subject Environmental Engineering Design and hence the same is not covered under this subject).
1.         WATER SUPPLY SYSTEMS – SOURCE & CONVEYANCE                                           6
Objectives – Population forecasting – Design period – Water demand characteristics – Sources of water – Source selection – Water quality parameters & significance – Standards – Intake structures – Conveyance – Hydraulics – Laying, jointing & testing of pipes – Pump selection – appurtenances
2.         DESIGN PRINCIPLES OF WATER TREATMENT                                                        10
Objectives – Selection of unit operations and processes – Principles of flocculation, sedimentation, filtration, disinfection – Design principles of flash mixer, flocculator, clarifiers, filters – Disinfection devices – Softening – Demineralisation – Aeration – Iron removal – Defluoridation – Operation and Maintenance aspects  - Residue Management
DISTRIBUTION                                                                                                            
Requirements – Components – Service reservoir design – Analysis of distribution network – Hardy Cross method – Equivalent Pipe method – computer application – Leak detection    
3.         SEWERAGE SYSTEM : COLLECTION & TRANSMISSION                                         10
Sources of wastewater – Quantity of sanitary sewage – Storm run off estimation – Wastewater characteristics and significance – Effluent disposal standover – Design of sewers – Computer applications – Laying, jointing and testing of sewers – Sewer appurtenances – Pump selection
4.         SEWAGE TREATMENT & DESIGN PRINCIPLES                                                       10
Objectives – Selection of unit operation and process – Design principles of primary and secondary treatment, screen chamber, grit chamber, primary sedimentation tanks, activated sludge process – Aeration tank & oxidation ditch – Trickling filter - Stabilisation ponds – Septic tanks with soak pits – Sludge: treatment and disposal – Biogas recovery – Sewage farming
5.         DISPOSAL OF SEWAGE                                                                                            9
Disposal on land – Disposal into water bodies – Oxygen sag curve – Streeter Phelp’s model – Wastewater reclamation techniques
TOTAL : 45
TEXT BOOKS
1.         Garg, S.K., “Environmental Engineering I & II”, Khanna Publishers, New Delhi
2.         Modi, P.N., “Environmental Engineering I & II”, Standard Book House, Delhi – 6 
REFERENCES
1.         Manual on Water Supply and Treatment, CPHEEO, Government of India, New Delhi, 1999
2.         Manual on Sewerage and Sewage Treatment, CPHEEO, Government of India, New Delhi, 1993
3.         Hand book on Water Supply and Drainage, SP35, B.I.S., New Delhi, 1987
4.         Metcalf and Eddy, M.C., “Wastewater Engineering – Treatment & Reuse”, Tata McGraw-Hill Publications, New Delhi, 2003

CE1305             FOUNDATION ENGINEERING                                                   3  0  0  100
OBJECTIVE                                                                                         
At the end of this course student acquires the capacity to investigate the soil condition and to design suitable foundation.
              
1.         SITE INVESTIGATION AND SELECTION OF FOUNDATION                                         9
Scope and objectives – Methods of exploration-averaging and boring – Water boring and rotatory drilling – Depth of boring – Spacing of bore hole - Sampling – Representative and undisturbed sampling – sampling techniques – Split spoon sampler, Thin tube sampler, Stationary piston sampler  – Bore log report – Penetration tests (SPT and SCPT) – Data interpretation (Strength parameters and Liquefaction potential) – Selection of foundation based on soil condition.
2.         SHALLOW FOUNDATION                                                                                            9
Introduction – Location and depth of foundation – codal provisions – bearing capacity of shallow foundation on homogeneous deposits – Terzaghi’s formula and BIS formula – factors affecting bearing capacity – problems - Bearing Capacity from insitu tests (SPT, SCPT and plate load) – Allowable bearing pressure, Settlement – Components of settlement – Determination of settlement of foundations on granular and clay deposits – Allowable settlements – Codal provision – Methods of minimising settlement, differential settlement.
3.         FOOTINGS AND RAFTS                                                                                              9
Types of foundation – Contact pressure distribution below footings & raft - Isolated and combined footings – types – proportioning - mat foundation – types – use - proportioning – floating foundation.
4.         PILES                                                                                                                        9
Types of piles and their function – Factors influencing the selection of pile – Carrying capacity of single pile in granular and cohesive soil - Static formula - dynamic formulae (Engineering news and Hiley’s) – Capacity from insitu tests (SPT and SCPT) – Negative skin friction – uplift capacity – Group capacity by different methods (Feld’s rule, Converse Labarra formula and block failure criterion) – Settlement of pile groups – Interpretation of pile load test – Forces on pile caps – under reamed piles – Capacity under compression and uplift.
5.         RETAINING WALLS                                                                                                     9
Plastic equilibrium in soils – active and passive states – Rankine’s theory – cohesionless and cohesive soil  - Coloumb’s wedge theory – condition for critical failure plane - Earth pressure on retaining walls of simple configurations – Graphical methods (Rebhann and Culmann) - pressure on the wall due to line load – Stability of retaining walls.                                                                                                       
TOTAL : 45
TEXT BOOKS
        1. Murthy, V.N.S, “Soil Mechanics and Foundation Engineering”, UBS Publishers Distribution Ltd, New Delhi, 1999.
        2. Gopal Ranjan and Rao, A.S.R. ”Basic and Applied Soil Mechanics”, Wiley Eastern Ltd., New Delhi (India), 2003.
           
REFERENCES
1.   Das, B.M. “Principles of Foundation Engineering (Fifth edition), Thomson Books / COLE,            2003
2.   Swamisaran, “Analysis and Design of Structures – Limit state Design”, Oxford IBH Publishing Co-Pvt. Ltd., New Delhi, 1998
3.   Kaniraj, S.R, “Design aids in Soil Mechanics and Foundation Engineering”, Tata McGraw Hill publishing company Ltd., New Delhi, 2002
  1. Bowles J.E, “Foundation analysis and design”, McGraw-Hill, 1994
5.   Punmia, B.C., “Soil Mechanics and Foundations”, Laxmi publications pvt. Ltd., New Delhi, 1995.
6.   Venkatramaiah, C. ”Geotechnical Engineering”, New Age International Publishers, New Delhi, 1995
7.   N.N. Som and S.C. Das, “Theory and Practice of Foundation Design”, Prentice Hall of India Pvt. Ltd., New Delhi, 2003

CE1306 ENVIRONMENTAL ENGINEERING LABORATORY                     0  0  3  100OBJECTIVE                                                                                                           This subject includes the list of experiments to be conducted for characterisation of water and municipal sewage. At the end of the course, the student is expected to be aware of the procedure for quantifying quality parameters for water and sewage.

LIST OF EXPERIMENTS

1.         Sampling and preservation methods and significance of characterisation of water and wastewater.
2.         Determination of
  1. PH and turbidity
  2. Hardness
3.         Determination of iron & fluoride
4.         Determination of residual chlorine
5.         Determination of Chlorides
6.         Determination of Ammonia Nitrogen
7.         Determination of Sulphate
8.         Determination of Optimum Coagulant Dosage
9.         Determination of available Chlorine in Bleaching powder
10.        Determination of dissolved oxygen
11.        Determination of suspended, volatile and fixed solids
12.        B.O.D. test
13.        C.O.D. test
14.        Introduction to Bacteriological Analysis (Demonstration only)
                                                                                    TOTAL : 45

REFERENCES

1.         Standard methods for the examination of water and wastewater, APHA, 20th Edition, Washington, 1998
2.         Garg, S.K., “Environmental Engineering Vol. I & II”, Khanna Publishers, New Delhi
3.         Modi, P.N., “Environmental Engineering Vol. I & II”, Standard Book House, Delhi-6

LIST OF EQUIPMENTS

(for a batch of 30 students)
1.         PH meter
2.         Turbidity meter                                      -           1 no.
3.         Conductivity meter                                -           1 No.
4.         Refrigerator                                           -           1 No.
5.         BOD incubator                                      -           1 No.
6.         Muffle furnace                                       -           1 No.
7.         Hot air oven                                          -           1 No.
8.         Magnetic stirrer with hot plates               -           5 Nos.
9.         Desicator                                              -           1 No.
10.        Jar test apparatus                                 -           1 No.
11.        Water bath                                            -           1 No.
12.        Furniture                                               -           1 lot
13.        Glass waves / Cruicibles                        -           1 lot
14.        Chemicals                                             -           1 lot
15.        COD apparatus                                     -           1 No.
16.        Kjeldane apparatus                                -           1 No.
17.        Heating mantles                                    -           5 Nos.
18.        Calorimeter                                           -           1 No.
19.        Chlorine comparator                              -           1 No.
20.        Furniture : Work table                             -           10 Nos.
21.        Beaker                                                  -           30 Nos.
22.        Standard flask                                       -           30 Nos.
23.        Burette with stand                                  -           15 Nos.
24.        Pipette                                                  -           15 Nos.
25.        Crucible                                                -           15 Nos.
26.        Filtration assembly                                -           1 No.
27.        Chemicals                                             -           Lot

CE1307             SOIL ENGINEERING LABORATORY                             0  0  3  100
OBJECTIVE                                                                              At the end of this course, the student acquires the capacity to test the soil to assess its Engineering and Index properties.           
  1. Grain size distribution - Sieve analysis
  2. Grain size distribution - Hydrometer analysis
  3. Specific gravity of soil grains
  4. Relative density of sands
  5. Atterberg limits test
  6. Determination of moisture - Density relationship using standard Proctor test.
  7. Permeability determination (constant head and falling head methods)
  8. Determination of shear strength parameters.
Direct shear test on cohesionless soil
Unconfined compression test on cohesive soil
Triaxial compression test
  1. One dimensional consolidation test (Determination of co-efficient of consolidation only)
  2. Field density test (Core cutter and sand replacement methods)
TOTAL :  45
REFERENCES
  1. “Soil Engineering Laboratory Instruction Manual”, Published by the Engineering College Co-operative Society, Chennai, 2002.
  2. Head, K.H, “Manual of Soil Laboratory Testing (Vol-1 to 3)”, John Wiley & Sons, Chichester, 1998.
  3. Lambe T.W., “Soil Testing for Engineers”, John Wiley and Sons, New York, 1990.
  4. “I.S.Code of Practice (2720) Relevant Parts”, as amended from time to time.
  5. Saibaba Reddy, E. and Rama Sastri, K., “Measurement of Engineering Properties of Soils”, New Age International Publishers, New Delhi, 2002.

LIST OF EQUIPMENT
(For a batch of 30 students)

Sl. No.
Description of Equipments Quantity
1.
Sieves
2 sets
2.
Hydrometer
2 sets
3.
Liquid and plastic limit apparatus
2 sets
4.
Shinkage limit apparatus
3 sets
5.
Proctor compaction apparatus
2 sets
6.
UTM of minimum of 20KN capacity
1
7.
Direct shear apparatus
1
8.
Thermeometer
2
9.
Field density measuring device
2
10.
Triaxial shear apparatus
1
11.
Three gang consolidation test device
1

FEEL USEFUL PLEASE GIVE +1

0 comments :

Post a Comment

Get Syllabus in your Mail

Labels

Accenture Admission Notice - 2010 Admission Notification Anna University Anna University Chennai Anna University Question Papers Anna University Trichy Apparel Technology and Management Aptitude Questions Arts and Science Colleges Biomedical Engineering C and CPP Ebooks Calicut University CBSE Question papers Civil Engineering Civil Service Exams Colleges in India Colleges Result Computer Science Engineering Core Jobs CS R2008 CSE CSIR NET EBooks Download ECE EEE EIE Electives Electrical and Electronics Engineering Electronics and communication Electronics and Instrumentation Engineering Engineering Engineering Colleges in Maharashtra Engineering Colleges in TamilNadu Engineering Admissions Engineering Colleges Engineering Colleges in Karnataka Engineering Jobs Engineering Syllabus Entrance Exam Dates Entrance Exam Results Entrance Examination Exam Time Table Experiencer First Year Syllabus Freshers Full Time Jobs Government jobs in india Hardware and Networking Jobs Hotel Management and Catering Technology IGNOU Information Technology INTEVIEW QUESTIONS IT Jobs JNTU Question Papers Jobs in Bangalore Jobs in Chennai Jobs in Coimbatore Jobs in Delhi Jobs in Hyderabad Jobs in India Jobs in Kerala Jobs in Noida Jobs in Tamilnadu Jobs in TATA Karnataka Educations Lab Manuals Mechanical Engineering Medical Colleges Placement Papers Plus 2 Preparation for exams Private Jobs in India Question Papers Question Papers Download Results Announcement Semester 1 Semester 2 Semester 3 Semester 4 Semester 5 Semester 6 Semester 7 Semester 8 Syllabus Syllabus Download Tamil Movie TCS Placement Papers Teaching Jobs TECH MAHINDRA Textile Technology Top colleges University Results UPSC VICEVESVARAYA TECHNOLOGICAL UNIVERSITY waec Walk-in Interview Web Designers

Followers

Archive

Anna university Engineering Syllabus

Earn Money From Online

Government jobs in india

Admission Notification

Total Pageviews

 

Privacy Policy
http://topengineeringcollegesintamilnadu.blogspot.com use third-party advertising companies to serve ads when you visit our website. These companies may use information (not including your name, address, email address, or telephone number) about your visits to this and other websites in order to provide advertisements about goods and services of interest to you. If you would like more information about this practice and to know your choices about not having this information used by these companies, click here.