January 30, 2012

ENGINEERING GRAPHICS – Nov/Dec 2011 Anna University Previous year Model Question Paper


B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2011
Common to All B.E./B.Tech.
First Semester
185101 — ENGINEERING GRAPHICS
(REGULATION 2010)
Time : Three hours Maximum : 100 marks
Answer ALL questions.
(5 ´ 20 = 100 marks)  

1. (a) Construct an ellipse when the distance of its focus from its directrix is equal to 50 mm and the eccentricity is 2/3. Also draw a tangent and a normal to the ellipse.
Or  

(b) Make free hand sketches of the front, top and left side view of the object
shown in Fib. Q 1(b).
Fib. Q 1(b)

2. (a) A Line AB has its end A 15 mm above H.P and 20 mm in front of V.P.The end B is 60 mm above H.P. and the line is inclined at 30° to H.P. The
distance between the end projectors of the line is 55 mm. Draw theprojections and find its inclination with V.P.
Or   
(b) A regular hexagonal lamina of 40 mm side is resting on one of its corner on H.P. Its surface is inclined at 45° to H.P. The plan of the diagonal through the corner which is on H.P. makes an angle of 45° with XY. Draw
its projections.

3. (a) A hexagonal prism of side of base 25 mm and axis 60 mm rests on a corner of its base in H.P. with the axis of the prism inclined at 40° to H.P.
and parallel to V.P. Draw its projections.
Or  
(b) A pentagonal pyramid of base edge 25 mm and axis length 60 mm rests on one base side on HP such that the highest base corner is 20 mm above
HP. Its axis is parallel to VP. Draw its top and front views.

4. (a) A tetrahedron of 60 mm long edges rests with one of its face on H.P. and an edge is perpendicular to V.P. A section plane perpendicular to V.P
cuts the tetrahedron such that the true shape of section is an isosceles triangle of base 50 mm and altitude 36 mm. Draw the front view,
sectional top view and the true shape of the section. Also find the inclination of the section plane.
Or  
(b) A vertical cylinder of diameter 50 mm and height 80 mm is drilled by a hole of diameter 30 mm such that the axis of the hole is perpendicular to
V.P. and parallel to H.P. Draw the lateral surface development of the solid.
5. (a) A hexagonal prism of base edge, 20 mm and height 60 mm rests on the H.P. on its base with two of its rectangular faces parallel to V.P. It is cut by a plane inclined at 30° to H.P cutting the axis of the prism at a height of 45 mm from its base. Draw the isometric view of the truncated prism.
Or   http://topengineeringcollegesintamilnadu.blogspot.com

(b) A square prism of 55 mm edge of base and 70 mm height is placed on the ground behind the PP with its axis vertical and one of the edges of the base receding to the left at an angle of 40° to the PP. The nearest vertical edge of the solid is 20 mm behind PP and 25 mm to the left of the observer who is at a distance of 120 mm in front of PP. The height of the observer above the ground is 100 mm. Draw the perspective view of the prism.

FEEL USEFUL PLEASE GIVE +1

0 comments :

Post a Comment

Get Syllabus in your Mail

Labels

Accenture Admission Notice - 2010 Admission Notification Anna University Anna University Chennai Anna University Question Papers Anna University Trichy Apparel Technology and Management Aptitude Questions Arts and Science Colleges Biomedical Engineering C and CPP Ebooks Calicut University CBSE Question papers Civil Engineering Civil Service Exams Colleges in India Colleges Result Computer Science Engineering Core Jobs CS R2008 CSE CSIR NET EBooks Download ECE EEE EIE Electives Electrical and Electronics Engineering Electronics and communication Electronics and Instrumentation Engineering Engineering Engineering Colleges in Maharashtra Engineering Colleges in TamilNadu Engineering Admissions Engineering Colleges Engineering Colleges in Karnataka Engineering Jobs Engineering Syllabus Entrance Exam Dates Entrance Exam Results Entrance Examination Exam Time Table Experiencer First Year Syllabus Freshers Full Time Jobs Government jobs in india Hardware and Networking Jobs Hotel Management and Catering Technology IGNOU Information Technology INTEVIEW QUESTIONS IT Jobs JNTU Question Papers Jobs in Bangalore Jobs in Chennai Jobs in Coimbatore Jobs in Delhi Jobs in Hyderabad Jobs in India Jobs in Kerala Jobs in Noida Jobs in Tamilnadu Jobs in TATA Karnataka Educations Lab Manuals Mechanical Engineering Medical Colleges Placement Papers Plus 2 Preparation for exams Private Jobs in India Question Papers Question Papers Download Results Announcement Semester 1 Semester 2 Semester 3 Semester 4 Semester 5 Semester 6 Semester 7 Semester 8 Syllabus Syllabus Download Tamil Movie TCS Placement Papers Teaching Jobs TECH MAHINDRA Textile Technology Top colleges University Results UPSC VICEVESVARAYA TECHNOLOGICAL UNIVERSITY waec Walk-in Interview Web Designers

Followers

Archive

 

Privacy Policy
http://topengineeringcollegesintamilnadu.blogspot.com use third-party advertising companies to serve ads when you visit our website. These companies may use information (not including your name, address, email address, or telephone number) about your visits to this and other websites in order to provide advertisements about goods and services of interest to you. If you would like more information about this practice and to know your choices about not having this information used by these companies, click here.